منتدى شبكة سكاي نت لخدمات الانترنت اللاسلكي - SkyNet For Wireless Internet
هل تريد التفاعل مع هذه المساهمة؟ كل ما عليك هو إنشاء حساب جديد ببضع خطوات أو تسجيل الدخول للمتابعة.

منتدى شبكة سكاي نت لخدمات الانترنت اللاسلكي - SkyNet For Wireless Internet

منتدى يختص بكل البرامج الهامة التى تهم كل مستخدم وخاصة مستخدمي شبكة سكاي نت لخدمات الانترنت اللاسلكي
 
الرئيسيةFaceBook المنتدىالبوابةأحدث الصورالتسجيلدخول
الآن . افحص سرعة النت لديك


 

 اصدارت الــــ PicoStation2HP

اذهب الى الأسفل 
كاتب الموضوعرسالة
Admin
Admin



عدد المساهمات : 272
تاريخ التسجيل : 19/03/2013

اصدارت الــــ PicoStation2HP Empty
مُساهمةموضوع: اصدارت الــــ PicoStation2HP   اصدارت الــــ PicoStation2HP Icon_minitimeالأربعاء يونيو 25, 2014 12:13 am

شبكة سكاي نت لخدمات الانترنت اللاسلكي

تقدم لكم اصدارت البيكو القديمة والحديثة لترقية او العودة اليها بعد حدفها من موقع الشركة

نسخرها هنا بين ايديكم وبالمجان

PicoStation2HP
اصدارت الــــ PicoStation2HP 9jkxvp6oh769
اصدارت الــــ PicoStation2HP Ffyftrp5cwy2
اصدارت الــــ PicoStation2HP Dja8losbt5f8
AirOS Firmware Revision History
  * PowerStation
  * LiteStation
  * NanoStation
  * MiniStation
  * WispStation
  * NanoStation Loco
  * PicoStation
  * Bullet
  * AP1000
====================================================================
Version 4.0.3-Service (28/03/2013)
----------------------------------
- New: Remove AP wireless mode in 5GHz products for EU countries/Switzerland due to EU regulatory requirements
- Fix: Change max EIRP for 2.4GHz band to 36dBm for India
- Fix: 802.11a/b/g clients sometimes fails to exchange WPA keys

- WEB UI: Notification for software updates
- WEB UI: Copyright update


Version 4.0.2 (Production only) (20/04/2012)
-------------------------------------
- New: Add new UBNT MAC OUI support (DC-9F-DB)


Version 4.0.1 Service (12/19/2011)
----------------------------------
- Fix: HTTP server security exploit


Version 4.0 Final (08/23/2011)
------------------------------
- CCR: Add possibility to change Country code for some countries
- GUI fix: Strip long SSID in Status page
- GUI fix: Edit button near MAC ACL comment


Version 4.0-RC (08/02/2011)
---------------------------
- CCR: Return Iraq country code
- CCR: Remove indoor range for Brazil ( 5.1-5.3GHz frequencies)
- CCR: Show Band C UK frequencies in a list
- CCR: Add Hostname comment near MAC address in ACL configuration
- CCR: Allow to change Country if currently device is operating in Compliance Test mode

- Fix: Tranzeo client connection problem with UBNT AP
- Fix: Upgrading from v3.6.1 > 4.0 changes country code for some countries


Version 4.0-BETA (06/03/2011)
-----------------------------

- New: AirMax client support/AirMax client status reporting/AirMax client priority settings under Advanced tab
- New: AirSelect client support

- New: Initial Login page with Country/Language selection, lock to selected Country after FW update
- New: Replace Obey Regulatory rules with Auto Adjust to EIRP Limit functionality
- New: Remove non 5.7-5.8 GHz for USA/Canada
- New: Remove some countries according US export policy statement (Iran, North Korea, Sudan)
- New: WEB GUI style update
- New: Change AirOS logo into airOS

- Fix: Packets corruption on Ethernet RX
- Fix: Speed test issues

- GUI fix: Option to disable device discovery
- GUI fix: Throughput graphs did not appear under IE
- GUI fix: Hide EAP configuration when it is not needed
- GUI fix: Longer hostname should be truncated in Main page
- GUI fix: Term of Use: Spanish translation fixes

Known issues/warnings:
- Please check your Country code before FW update. After FW update your country code will be locked.
- AirSync mode is not supported due to HW limitations
- AirMax AP mode is not supported due to HW limitations
- Long range PTP functionality is not supported due to HW limitations
- 2.4GHz AirMax client support will have some performance degradation compared with AirMax OFF mode
- Auto ACK is not supported in AirMax client mode -- please always use static ACK for AirMax client mode
- GUI: Logo Customization is not functional

Version 3.6.1-Service (03/30/2011)
---------------------------------
- new: Login page with Country/Language selection for first login
- new: Antenna Gain/Cable Loss fields for models without built-in antenna
- new: Installer EIRP Calculation under Advanced menu allowing manual power regulation on device

- fix: NTP improvement for DHCP client
- fix: CCQ Reporting much lower after upgrade from v3.5.1 > v3.6
- fix: Traffic shaper low priority does not work
- fix: Bullet2 in G only mode crashes on association when operating with fixed rates 
- fix: DNS Proxy issue

- fix: AirControl agent: WLAN TX Rate value reporting
- fix: AirControl agent: Discovery does not report PPPoE interface address

- GUI fix: Missing character in Polish Language
- GUI fix: All fields required with FireFox4 / Opera browsers
- GUI fix: PEAP support in the GUI is expected
- GUI fix: Don't allow to enter empty value for NTP server address


Version 3.6-Final (11/29/2010)
------------------------------

- fix: Source IP/Mask field in Port Forwarding is too short (GUI)
- fix: Check for duplicate IP address, when generating new IP for AutoIP aliasing

Version 3.6-RC (10/05/2010)
---------------------------
- improvement: DFS client
- fix: IGMP proxy is not recognizing upstream

Version 3.6-BETA (09/15/2010)
-----------------------------

- new: DFS functionality enhancement
- new: AirControl agent: Support for latency reporting
- new: AirControl agent: Support for GPS location
- new: AirControl agent: Configuration change indication
- new: AirControl agent: Report network adapter status

- fix: Calculated CCQ value is higher than 100%
- fix: Client roaming fails in STA-WDS - AP-WDS configuration
- fix: SNMP: OIDs changes after device reboot
- fix: Port forwarding should support src and dst "ports" criteria
- fix: Uptime in Show AP info is incorrect
- fix: Host name is lost on re-assoc
- fix: Firewall option i disabled without warning if "change" action initiated on "link setup" page
- fix: WEB UI: Read only user can access system files on device
- fix: Add 5470 -5725 MHz frequency range for France
- fix: CDP packet incorrect checksum
- fix: Incorrect Australia output power limits
- fix: Auto ACK doesn't work when WEP security is used


Version 3.5.1-Final (06/30/2010)
-------------------------------
- fixed: Traffic Shaping is not effective if Bursting is set to value 0
- fixed: India country code changes


Version 3.5.1-RC2 (06/11/2010)
------------------------------
- fixed: G only station uses CCK rates on TX.
- fixed: B only station is reporting that supports OFDM rates.
- fixed: PPPoE client isn't restoring session after lost wireless link connection.
- fixed: Traffic shaping (bursting) doesn't work (When bursting is too high, traffic shaping is not working).
- fixed: PPPoE oops on ppp interface shutdown.
- fixed: DHCP server lease problems.
- improvement: TX improvements: Do not transmit multicast/broadcast traffic when there is no need.
- AirControl agent fix: Restore console reporting after wireless association is restored
- AirControl agent new: Report association time
- AirControl agent fix: Odd behavior with discovery response


Version 3.5.1-RC (04/20/2010)
------------------------------
- fixed: B-only station can connect to G-only AP.
- fixed: Enabling AutoACK on AP will not accept any station connection.


Version 3.5.1-Beta (03/23/2010)
-------------------------------
- new: Auto ACK implementation.
- new: AirControl agent: Restore active heartbeat connections after firmware upgrade.
- fixed: Crash when using HTC phones.
- fixed: No connection to the AP, when power saving is enabled on HTC phone.
- fixed: Enabled Noise Immunity causes persistent device re-associations.
- fixed: PPPoE session hangup using MPPE encryption.
- fixed: PPPoE client is too aggressive.

Version 3.5 (10/01/2009)
-------------------------
- increased reset to defaults timings (prevents from accidental reset to defaults).
- fixed: WEB UI lock.
- improved: Traffic shaping.

Version 3.5-rc (09/11/2009)
---------------------------
- fixed: PPPoE client locks up.
- fixed: PPPoE client can't authenticate if in username symbol # is used.
- fixed: Traffic shaping is not working. Can't add shaping rules.
- fixed: VLAN QoS to WMM mapping.
- fixed: Traffic shaper is expected to honor packet priority.
- fixed: WEP entry field validation error message on Web UI.
- fixed: problem with AP channel when in some circumstances(after reboot/softrestart) it might get different from config value
- improvement: STA-Bridge multiple IP and VLAN per MAC.
- improvement: Set pppoe maxfail to 0 by default.
- added: Ethernet port MTU value can be set manually up to 1692 bytes (Long packet support (>1500bytes)).
- added: 152bit (128bit key + 24bit IV) WEP support in Web UI and config.

Version 3.4 (05/21/2009)
--------------------------
 - minor GUI fixes: DNS, Rate Selection, MAC ACL count increased to 32 entries. 
 - fixed problem with Optimistic algorithm when max rate was not highest available.
 - improved AP-WDS connectivity and stability.
 - improved WPA connectivity and stability.

Version 3.4-rc (05/04/2009)
---------------------------
 - fixed memory leak on scan.
 - fixed problem with random freezing when Noise Immunity enabled. 
 - fixed firewall Web UI problem with NOT checkbox modifiers.

Version 3.4beta (04/14/2009)
----------------------------
 - improved signal LED's responsiveness.
 - fixed CDP packets every second problem with NTP enabled.
 - improved cfg reliability.
 - fixed crash on AP with WPA when stations probing before full startup.
     * above two should resolve reset to defaults problem which was happening
       after applying configuration changes when configuring AP with WPA.
 - fixed fragmentation + QoS tx freezing and freezing on high load.
 - fixed ANI/Noise Immunity. It is realy working now even for AP mode. 
 - fixed Align Antenna is now working with Opera also.
 
Version 3.3.3 (03/16/2009 Product Names update)
------------------------------------------------
 - updated Bullet5-HP product name on Web UI according to board subtype.
  
Version 3.3.3 (03/13/2009 XS2 FW Fix only)
------------------------------------------------
 - updated PS2-17D product name on Web UI according to board subtype.
 - fixed PS2/PS2-18V/PS2-17D/PS2-EXT WAN LED behavior.

Version 3.3.2 (02/14/2009)
--------------------------
 - updated antennas(names, gains) for LocoStation 2/5
 - updated product names on Web UI according to board subtypes.

Version 3.3.1 (01/28/2009)
--------------------------
 - updated country names on Web UI according ISO 3166
 - fixed auto AP-WDS rare uninitialized rates problem.
 - fixed AID leak on auto AP-WDS timeout.
 - fixed crash on dynamic WDS timeout.
 - fixed led blink on every 15s on Auto WDS.
 - fixed Ack timeout calculations for 10/5MHz modes.
 - fixed fast frame, bursting, compression support for 2.4GHz products.
 - fixed superA/G operation issue in AP-WDS to AP-WDS mode.
 - optimized Dynamic Ack for different Wireless modes and bandwidth.
 - added Support information generation through Web UI.



====================================================================
للتحميل اضغط فوق الاصدار وتمتع بالتحميل ولا نريد سوى دعوة صادقة في الغيب لنا
====================================================================
PicoStation2HP-v4.0.3.build5058
====================================================================
PicoStation2HP-v4.0.2.build4996
====================================================================
PicoStation2HP-v4.0.2.build4983
====================================================================
PicoStation2HP-v4.0.1.build4978
====================================================================
PicoStation2HP-v3.6.build4703
====================================================================
PicoStation2HP-v3.5.1.build4631
====================================================================
PicoStation2HP-v3.5.build4494
====================================================================
PicoStation2HP-v3.4.build4390
====================================================================
PicoStation2HP-v3.3.3.build4297
====================================================================
PicoStation2HP-v3.3.2.build4257
====================================================================
PicoStation2HP-v3.3.1.build4227
====================================================================
PicoStation2HP-v3.3.build4206
====================================================================
PicoStation2HP-v3.2.2.build4003
====================================================================
PicoStation2HP-v3.2.build3734
====================================================================
====================================================================
شبكة سكاي نت لخدمات الانترنت اللاسلكي
====================================================================
الرجوع الى أعلى الصفحة اذهب الى الأسفل
https://skynet.roo7.biz
 
اصدارت الــــ PicoStation2HP
الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1
 مواضيع مماثلة
-
» اصدارت الــــ Bullet2HP
» اصدارت الــــ NanoStation M5 + Loco

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
منتدى شبكة سكاي نت لخدمات الانترنت اللاسلكي - SkyNet For Wireless Internet :: قسم التعريف بـ شبكة سكاي نت :: Firmware Relase-
انتقل الى:  
بحـث
 
 

نتائج البحث
 
Rechercher بحث متقدم
الساعة الآن حسب شبكة سكاي نت لخدمات الانترنت اللاسلكي

نوفمبر 2024
الإثنينالثلاثاءالأربعاءالخميسالجمعةالسبتالأحد
    123
45678910
11121314151617
18192021222324
252627282930 
اليوميةاليومية
لغات
أختر لغة المنتدى من هنا
حقوق الطبع والنشر
جميع الحقوق محفوظة لـ شبكة سكاي نت لخدمات الانترنت اللاسلكي
 Powered by ٍSkyNet ® skynet.roo7.biz
حقوق الطبع والنشر©2014 - 2010